|
|
Civic amenities building
Brázdová, Kateřina ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
Mixed-use building in Prostějov The aim of this master´s thesis is to elaborate the project documentation of a mixed-use building in Prostějov. The thesis consists of three parts: architectural-construction part, building services and elective part. The building has two above-ground floors. On the first floor there are storerooms, utility room, sanitary facilities and restaurant with kitchen and storerooms. The second floor is an office floor for one company which includes offices, dayroom, copyroom, meeting room and sanitary facilities. The building is founded on reinforced concrete foundation. The horizontal load-bearing and non-load-bearing structures are designed from ceramics blocks. The building is insulated by ETICS. The vertical load-bearing structures are designed from Spiroll slabs. The building has a green flat roof. There are parking spaces on the grounds. The building will be heated and cooled with a heat pump. It will also have an air condition. Part of electricity demand is covered by photovoltaics. In the third part of thesis, I replace frequently used materials with environmental ones in my project and compare them in terms of thermal engineering, acoustics and price. I used DEKSOFT, Hluk+, Autocad and Revit software. All structures comply with the valid standards and regulations.
|
|
|
Basic School of Art and Music
Klimšová, Barbora ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The final thesis is new building Basic school of art and music. The building is located in the urban area of Hronov. The building is divided into two wings. In one part of the building at 1 NP is mainly individual classrooms for play on an individual instrument. In the second part of the building is the concert hall, which is designed for orchestral rehearsal. The 2nd floor is mostly individual classrooms. In 3 NP is designed dance and ballet hall and individual classrooms. In the attic is a classroom for art education. The building has a partial basement. The building is planted on flat land. The building is brick from the system LIAPOR, overhead structures are made of panels SPIROLL, in the basement of a reinforced concrete slab. The roof construction is designed as a purlin roof and „hambalek“ purlin roofs made as saddle with a slope of 35 degrees.
|
|
|
Family house with a brewery T: O: P in Jevíčko
Němeček, Pavel ; Vávra, Petr (referee) ; Brzoň, Roman (advisor)
Bachelor´s thesis is focused on a project of a detached family house with a brewery T:O:P on a site 88/13 and 88/14 in a Jevíčko. Bachelor´s thesis is drawn in a project documentation for the realization of building. The house has two floors without cellarage, rectangular plan with flat roof, based on strip foundations made of a simple concrete. Vertical frameworks are devised from masonry type therm from Porotherm. Horizontal frameworks are from ceiling panels Spiroll. External wals are warmed by a contact system from polystyrene. Entry into the brewery premises and residential units, located on the second floor, is oriented to the southeast, entrance to the brasserie on the southwest. 1.NP is divided into two service. The service brewery with his technological background and administrative background brewer. The second service is brasserie brewery with his social service and visitors. Housing unit is separated from the brewery and brasserie ceiling constructions and has its own entrance from the open air.
|
|
|
Hostel
Antoňů, Vlasta ; Bartolšic, Vít (referee) ; Matějka, Libor (advisor)
The aim of this thesis is to develop design documents for building construction. This project deals with a new building of student hostel in Ostrava – distrikt Zábřeh nad Odrou. The new building is designed to accommodate students for year - round occupancy. There is a dining room use for staying students in the building, and students from nearby schools as well. They is also a gym, table tennis room, and multimedia classrooms available for students. House is situated on flat land. This bulding has four floors and one underground floor. The building is made of ceramics brigs blocks systém called Porotherm, underground brickwork from concrete breeze blocks, ceiling is made of pre-tensioned panel Spiroll and the type of the roof is warm flat roof.
|
|
|
Detached house with dentist's office
Ryšavý, Tomáš ; Jelínková, Barbora (referee) ; Ostrý, Milan (advisor)
The subject of my thesis work is design of two storey basementless family house with dental surgery. The building is located in the quiet part of Lower Lutyne with good access to the surrounding towns. The residential part of the house is designed to stay four people. Access to the building and into the clinic is wheelchair accessible. Before entering the clinic there are 5 parking spaces, one of which is intended for people with reduced mobility. The building is based on the footings, which first part is from plain concrete and second is made from porous concrete blocks inserted into the frost resistant depts. External walls are made of sand-lime bricks 200 mm wide and with contact insulation system 200 mm wide. Ceiling structure is solved ceiling panels Spiroll 250 mm wide. The gabled roof is made of wood trusses. The project includes a seminary work focused on the evaluation of the structures in terms of thermal technology and acoustics.
|
|
|
Civic amenities building
Brázdová, Kateřina ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
Mixed-use building in Prostějov The aim of this master´s thesis is to elaborate the project documentation of a mixed-use building in Prostějov. The thesis consists of three parts: architectural-construction part, building services and elective part. The building has two above-ground floors. On the first floor there are storerooms, utility room, sanitary facilities and restaurant with kitchen and storerooms. The second floor is an office floor for one company which includes offices, dayroom, copyroom, meeting room and sanitary facilities. The building is founded on reinforced concrete foundation. The horizontal load-bearing and non-load-bearing structures are designed from ceramics blocks. The building is insulated by ETICS. The vertical load-bearing structures are designed from Spiroll slabs. The building has a green flat roof. There are parking spaces on the grounds. The building will be heated and cooled with a heat pump. It will also have an air condition. Part of electricity demand is covered by photovoltaics. In the third part of thesis, I replace frequently used materials with environmental ones in my project and compare them in terms of thermal engineering, acoustics and price. I used DEKSOFT, Hluk+, Autocad and Revit software. All structures comply with the valid standards and regulations.
|
|
|
Basic School of Art and Music
Klimšová, Barbora ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The final thesis is new building Basic school of art and music. The building is located in the urban area of Hronov. The building is divided into two wings. In one part of the building at 1 NP is mainly individual classrooms for play on an individual instrument. In the second part of the building is the concert hall, which is designed for orchestral rehearsal. The 2nd floor is mostly individual classrooms. In 3 NP is designed dance and ballet hall and individual classrooms. In the attic is a classroom for art education. The building has a partial basement. The building is planted on flat land. The building is brick from the system LIAPOR, overhead structures are made of panels SPIROLL, in the basement of a reinforced concrete slab. The roof construction is designed as a purlin roof and „hambalek“ purlin roofs made as saddle with a slope of 35 degrees.
|
|
|
Hostel
Antoňů, Vlasta ; Bartolšic, Vít (referee) ; Matějka, Libor (advisor)
The aim of this thesis is to develop design documents for building construction. This project deals with a new building of student hostel in Ostrava – distrikt Zábřeh nad Odrou. The new building is designed to accommodate students for year - round occupancy. There is a dining room use for staying students in the building, and students from nearby schools as well. They is also a gym, table tennis room, and multimedia classrooms available for students. House is situated on flat land. This bulding has four floors and one underground floor. The building is made of ceramics brigs blocks systém called Porotherm, underground brickwork from concrete breeze blocks, ceiling is made of pre-tensioned panel Spiroll and the type of the roof is warm flat roof.
|
|
|
Family house with a brewery T: O: P in Jevíčko
Němeček, Pavel ; Vávra, Petr (referee) ; Brzoň, Roman (advisor)
Bachelor´s thesis is focused on a project of a detached family house with a brewery T:O:P on a site 88/13 and 88/14 in a Jevíčko. Bachelor´s thesis is drawn in a project documentation for the realization of building. The house has two floors without cellarage, rectangular plan with flat roof, based on strip foundations made of a simple concrete. Vertical frameworks are devised from masonry type therm from Porotherm. Horizontal frameworks are from ceiling panels Spiroll. External wals are warmed by a contact system from polystyrene. Entry into the brewery premises and residential units, located on the second floor, is oriented to the southeast, entrance to the brasserie on the southwest. 1.NP is divided into two service. The service brewery with his technological background and administrative background brewer. The second service is brasserie brewery with his social service and visitors. Housing unit is separated from the brewery and brasserie ceiling constructions and has its own entrance from the open air.
|
|
|
Detached house with dentist's office
Ryšavý, Tomáš ; Jelínková, Barbora (referee) ; Ostrý, Milan (advisor)
The subject of my thesis work is design of two storey basementless family house with dental surgery. The building is located in the quiet part of Lower Lutyne with good access to the surrounding towns. The residential part of the house is designed to stay four people. Access to the building and into the clinic is wheelchair accessible. Before entering the clinic there are 5 parking spaces, one of which is intended for people with reduced mobility. The building is based on the footings, which first part is from plain concrete and second is made from porous concrete blocks inserted into the frost resistant depts. External walls are made of sand-lime bricks 200 mm wide and with contact insulation system 200 mm wide. Ceiling structure is solved ceiling panels Spiroll 250 mm wide. The gabled roof is made of wood trusses. The project includes a seminary work focused on the evaluation of the structures in terms of thermal technology and acoustics.
|
guest ::
